All-in-One Bi-Fold/Sliding Door
>
>
Bi-Fold/Sliding Door

The best way to create and organize your Revit Patio Doors in your Project


All of the built-in features in the All-in-One Revit Bi-Fold & Sliding Door Family were designed from the ground up to take advantage of the advanced parametric capabilities of Revit. So you can create any kind of Bi-Fold or Sliding Door & Window with just one single Family that you can’t do with any other Door Family.

All-in-One Revit Bi-Fold/Sliding Door Family

All-in-One Revit Bi-Fold/Sliding Door Family - The Door System Bi-Fold & Sliding Door System
The All-in-One Revit Bi-Fold Door / Sliding Door Family is the best way to create your Patio Doors. The built in fully parametric Panel system lets you create any Bi-Fold Door or Sliding Door System you need for your Project. You can setup a Bi-Fold Door with any number of right and/or left Door Panels and switch to a Sliding Door with just one click, keeping all your settings. This is the first time that you can get all the Patio Doors you need with just a few clicks. They all follow exactly to your requirements, and you don’t just get the Doors you need but you use just one Family and keep your Revit Project efficient and your Door Content easy to maintain.
The Wall Opening
The Wall opening doesn’t get that much attention with normal Door Families as you might have experienced. Not so with this All-in-One Revit Bi-Fold Door / Sliding Door Family as it lets you have full control over the Wall Opening with many adjustable parameters to get the Opening, the Render wrapping, etc. exactly how you require it for your specific Project.
All-in-One Revit Bi-Fold/Sliding Door Family - The Wall Opening
All-in-One Revit Bi-Fold/Sliding Door Family - The Frame System The Frame System
It could not be easier to get the right Frame than with this advanced parametric Bi-Fold Door / Sliding Door Family. The Frame adjusts automatically in its Position to the Panels as well in its Depth by switching between the Bi-Fold Door and the Sliding Door. Further details like upstands, guiderails, Overhead Operator Unit, etc. can be easily adjustied in dimensions as well as visibility.
The Panel System
The Panel System of the All-in-One Revit Bi-Fold Door / Sliding Door Family, is amazing powerful and simple at the same time. One and the same Panel transforms between Bi-Fold and Sliding Panels, and this with just one single Parameter to change. In Elevation, Symbol Lines are shown automatically for the right Panel System and adjustable to your local standards.
All-in-One Revit Bi-Fold/Sliding Door Family - The Frame System
All-in-One Revit Bi-Fold/Sliding Door Family - Door Schedule Door Schedule
And finally the All-in-One Revit Bi-Fold Door / Sliding Door Family lets you take advantage from the Revit schedule capabilities with all its great features and details.

The All-in-One Revit Bi-Fold Door / Sliding Door Family supports the Revit schedule functionality more then any other Door Family available giving you access to a long list of specially for scheduling prepared list of Parameters.
The Door System
All-in-One Revit Bi-Fold/Sliding Door Family - Bi-Fold Door Bi-Fold Door
The Bi-Fold Door gives you all the great features with 0 - 10 Panels one each side. The Panels are fully parametric and you can open and close each side separately from eachother. You can define the clear opening as well as the number of panels you want and the parametric functionallity does the rest for you. This way you can setup any single or double sided Bi-Fold Door with up to 20 Panels.
All-in-One Revit Bi-Fold/Sliding Door Family - Sliding Door Sliding Door
NEW in Version 3.0
To transform the Bi-Fold Door to a Sliding Door is for you just one click, thanks to the advanced parametric functionallity of this amazing Door Family. This Bi-Fold Door / Sliding Door Family allows you to setup single or double sided Sliding Doors, either with or without a Frame. As the Bi-Fold Door, the Sliding Door can be opened and closed seperately for each side.
All-in-One Revit Bi-Fold/Sliding Door Family - Sliding Door Bi-Fold & Sliding Window
To transform the Bi-Fold / Sliding Door to a Bi-Fold / Sliding Window is for you just another click, thanks to the advanced parametric functionallity of this amazing Door Family. This Bi-Fold Door / Sliding Door Family allows you also to setup single or double sided Sliding Windows, either with or without a Frame. As the Bi-Fold / Sliding Door, the Bi-Fold / Sliding Window can be opened and closed seperately for each side.
The Wall Opening
Rough Opening
The correct Rough Opening is the basic functionality that you await from a good Revit Door Family. If the Rough Opening is 100% correct, you can trust to use it for your construction as well as detail documentation drawings. The All-in-One Revit Bi-Fold Door / Sliding Door Family gives you the possibility to setup specific Rough Distances between your Frame and the actual opening.
All-in-One Revit Bi-Fold/Sliding Door Family - Rough / Clear Opening
Render Offset
You can setup various Wrapping options within the System Wall Family, but this is just the half way to get the exact detail you really need. It is important to be able to control how much the render overlaps your frame separate for interior as well as exterior and the All-in-One Revit Bi-Fold Door / Sliding Door Family lets you do this in a very convenient way.
All-in-One Revit Bi-Fold/Sliding Door Family - Render Offset
Wall Pockets for Sliding Door
The Sliding Door can be adjusted to a Frame based Sliding Door System which means that it has a surrounding frame and slides within this frame. With just one click the Sliding Door can be unlocked from the Frame to slide beyond the frame. When the Sliding door slides beyond the Frame, the wall pockets are automatically activated to form a niche or a pocket as soon as the Sliding Panels are within the Wall Area.
All-in-One Revit Bi-Fold/Sliding Door Family - Wall Pocket
The Frame / Panel System
All-in-One Revit Bi-Fold/Sliding Door Family - Frame Type Bi-Fold Door Frame
The Frame adjusts automatically to the active Door System. If the Bi-Fold Door is activated, the Frame depth adjusts automatically to the Panel thickness and the Guiderail for the Hinge-Bolts is shown. The Frame can be exactly adjusted in its position.

Bi-Fold Door Panels
The parametric Panels adjusts automatically to the clear width as well as number of Panels you specify and various Parameters let you adjust the Panels (Thickness, Frame Dimesnions, Glass, Material, etc.) exactly to your project specific requirements.
All-in-One Revit Bi-Fold/Sliding Door Family - Frame Rebates Sliding Door Frame
Having the Sliding Door activated, the Frame depth adjusts automatically to cover all Panels. This Feature can of course be disabled so that the Panales slide independantly from the Frame.

Sliding Door Panels
As soon as the Bi-Fold Door is deactivated, the same panels transform seamingless to a Sliding Door, keeping all the settings like Frame Dimensions, Materials, etc.

Even the adjusted opening keeps the same.
All-in-One Revit Bi-Fold/Sliding Door Family - Symbol Lines Corner Element NEW (Ver. 3.4)
The All-in-One Bi-Fold Door / Sliding Door Family is now able to let you setup a Corner Element with beautiful mitered Frames. With just a few clicks a corner element can be built either with or without vertical corner post.
All-in-One Revit Bi-Fold/Sliding Door Family - Glazing Bars Glazing Bars NEW (Ver. 3.5)
The All-in-One Bi-Fold Door / Sliding Door Family allows you now to add glazing bars by just adjusting two additional parameters.
All-in-One Revit Bi-Fold/Sliding Door Family - Symbol Lines Symbol Lines
The All-in-One Bi-Fold Door / Sliding Door Family shows automatically the correct Symbollines for the Bi-Fold Door or the Sliding Door. As our All-in-One Families are in use in more then 100 countries worldwide the Symbol lines can even be adjusted to your local standards.
Content ID:
RFA20352
Revit Version:
2009 and later
Family Typ:
3D Generic - Metric & Imperial
Content Title:
All-in-One Bi-Fold Door
All-in-One Sliding Door
Manufacturer:
-
File Size:
2.600 kB
$ 79.99

If you have problems with your purchase or you have any questions before you want to purchase this Revit® Family contact us via our Contact Page (use the Sale Enquiry Section) or just send us an email to sale@revit-content.com and our Sales Team will be happy to help you.