The best way to create and organize your Doors in your Revit Project
All of the built-in features in the All-in-One Revit Door Family were designed from the ground up to take advantage of the advanced parametric capabilities of Revit. So you can create any kind of Door with just one single Family that you can’t do with any other Door Family.
 |
The Door System The All-in-One Revit Door Family is the best way to create Doors. The built in fully parametric Frame system lets you create any Door System you need for your Project. You can setup a standard single Door, with all Details, Materials and Functions you require and then just duplicate it to different Door Types and change with just one click to a double Door, or from a Swing Door to a Sliding Door. This is the first time that you can get all the Doors you need with just a few clicks. They all follow exactly to your requirements, and you don’t just get the Doors you need but you use just one Family and keep your Revit Project efficient and your Door Content easy to maintain. |
|
The Wall Opening The Wall opening doesn’t get that much attention with normal Door Families as you might have experienced. Not so with this All-in-One Revit Door Family as it lets you have full control over the Wall Opening with many adjustable parameters to get the Opening, the Render wrapping, Reveal, etc. exactly how you require it for your specific Project. |
 |
 |
The Frame System There’s nothing like the Frame System in the All-in-One Revit Door Family. With just a few parameters, it lets you adjust the Door Frame to various Frame Types, with various Rebates and either as Wood or as Metal Profile Frame in a way you never could before. The amazing thing is that you can change all this at any configuration - So you can for example setup a specific Door with specific Rebates, a specific Door Panel, Glazing and various Accessories and then just duplicate it to a Corner Frame Type, a Closure Frame Type or a Block Frame. It’s so simple and efficient ... |
|
The Panel System With the Panel System of the All-in-One Revit Door Family, you can do much more than just see them as Symbol line in your Plan view or as a 3D Door Panel in your Rendering. You have various ways to show your Door Panel in the plan view in a detail and accuracy you haven’t seen before. The Panel follows automatically to your Frame setup, and with just one click you can even switch between Flush and not Flush or create an glazing within your Door Panel. |
 |
 |
Door Accessories There is even more Detail on the Accessories with a fully parametric Door Handle, that can be adjusted to a Emergency Bar, Lever handle, Pull Handle, Push Plate or just a Knob handle. There are also adjustable Kick Plates and more. |
|
Door Schedule And finally the All-in-One Door Family lets you take advantage from the Revit schedule capabilities with all its great features and details. The All-in-One Revit Door Family supports the Revit schedule functionality more then any other Door Family available giving you access to a long list of specially for scheduling prepared list of Parameters. |
 |
The Door System
 |
Single or Double Swing Door The Single Door gives you all the great features with either one or even two panels as you might need it for hotel or office Projects where noise reduction is a subject. It shows the exact space, the Door Panel needs to swing taking all the detail information from the rebates, Frame Type as well as Hinge Position into account. The Double Door gives you still the same great features like the Single Door but it lets you setup two individual Door sizes which fit perfectly together taking the Frame Rebate into account. The Swing Door Feature gives you full control to which angle each Door Panel opens, and even the pivot point of the Hinge can be adjusted to get the real Door Panel Swing. Another great feature is that you can control the 2D and 3D Angle of the Door Panels separately to show for example the Door Panel closed in the 3D view and in plan view the Symbol Lines showing the Door Panels open. |
 |
Single or Double Pivot Door NEW in Version 1.3 The Pivot Door Feature gives you the possibility to switch your Door from a normal Swing Door to a Pivot Door regardless of its Frame- or Panel Settings. This Switch can be done with just one Parameter, all the transformation to the Frame and Panel as well as Hinge Position is done automatically for you. |
 |
Single or Double Sliding Door The Sliding Door Feature gives you the possibility to switch your Door from a Swing Door to a Sliding Door regardless of its Frame- or Panel Settings. This Switch can be done with just one Parameter, all the transformation to the Frame and Panel as well as Hinge Position is done automatically for you. |
 |
Transom Window / Fanlight This All-in-One Revit Door Family is not just a normal single or Double Door, but can also be adjusted to have special Frames. The Transom Window is one of this special Frame settings and lets you add a Transom Window or Fanlight on top of the Door Frame that you set up. To activate the Transom Window it is necessary to change one Parameter, and all the transformation of the Wall opening as well as the Frame System is done automatically for you. Side Lights The Side Lights are another amazing way to create a special frames as they let you control each Side separate. The Sidelights can be adjusted in their width and even a Sill can be activated and be adjusted in its height. |
The Wall Opening
|
Rough Opening The correct Rough Opening is the basic functionality that you await from a good Revit Door Family. If the Rough Opening is 100% correct, you can trust to use it for your construction as well as detail documentation drawings. The All-in-One Revit Door Family gives you the possibility to setup specific Rough Distances between your Frame and the actual opening. |
 |
|
Tapered Reveal Many Projects are revitalizing existing Buildings and therefore Doors have to be placed into existing walls that often have tapered reveals. The All-in-One Revit Door Family helps you with its fully adjustable Reveals to exactly show each reveal as it is existing in the specific structure. |
 |
|
Render Offset You can setup various Wrapping options within the System Wall Family, but this is just the half way to get the exact detail you really need. It is important to be able to control how much the render overlaps your frame separate for interior as well as exterior and the All-in-One Revit Door Family lets you do this in a very convenient way. |
 |
|
Cut joined Wall The Wall System family gives you great possibilities to setup the exact Wall Layers you need. But sometimes it is necessary to add an additional Wall (e.g. Dry-Lining) and join it with the original Wall. The All-in-One Revit Door Family supports those additionally joined walls with its Wall opening and it applies all your settings for Rough Distance, Tapered Reveals as well as Render Offset seamless to the original Wall as well as any additional joined Wall. |
 |
The Frame System
|
Frame Type IMPROVED in Version 1.4 If you wanted to add correct information to your Building Information Model, finding the right Door Family has always been a challenge. Even more difficult was then to get this specific Door with the right Frame type. This hassle is now over as the All-in-One Revit Door Family gives you the full control over your Door Frame Type. You can change the Frame Type between a Closure Frame, Corner Frame or a Block Frame, just with one click and the advanced parametric functionality of this Door Family does the rest for you - it adjusts the Door Panel, the Wall opening, etc. and in case that the Door Frame doesn’t work with other settings like Transom Window, Side Lights, Sliding Door, etc. it prevents you from an error and is setting the appropriate Frame type automatically for you. Additional to the Frame Type the Frame can easily be changed between a Profile and Wood Frame. This Change can also be done with just one single Parameter and all your settings for Frame Type, Rebates, etc. are automatically adopted to fit to the chosen Frame Material by the All-in-One Revit Door Family. |
 |
Rebates IMPROVED in Version 1.4 Having the right Door Frame is already amazing, but imagine, that you could change even the number of rebates within this Frame - The All-in-One Revit Door Family lets you do this with just one simple parameter and again it does all the work around adjusting the rebates (e.g. adjusting the Door panel, Wall opening, etc.) for you. From Version 1.4 the Rebates are now more adjustable as you can have the option to activate or deactivate the Grooves. It is now possible to setup for example a US or UK Standard Steel Frame. |
 
|
Folds IMPROVED in Version 1.4 There are some Metal Frames that have either a single Fold or a Shadow Gap for the Render. The All-in-One Revit Door Family lets you setup a fully adjustable single fold, shadow gap or even no fold for the Closure Frame as well as the Corner Frame. From Version 1.4 the Fold can now also be adjusted to have a Ancher. It is now possible to setup for example a US or UK Standard Steel Frame. |
The Panel System
Door Accessories
 |
Handle The Door Handle within the All-in-One Revit Door Family is fully parametric and can simply be switched between various Handle Types with just one single Parameter and this separate for each Door Panel. Lock The Lock is also fully parametric and can be shown with or without the various Handle Types. Kick Plate On the Door Panel Surface of the All-in-One Revit Door Family there is a fully parametric Kick Plate that can be adjusted in its size as well as location and of corse in its material. |
 |
Hinges The All-in-One Revit Door Family doesn’t just show Hinges for each Door Panel in the plan view as well as in 3D View, it takes even the Role of the Hinge for the swing functionality very serious. The position as well as the size of the Hinge is fully adjustable, and the Door Panel adjusts automatically its size as well its swing radius to give you always the correct space required for the swing of the panel. |
 |
Threshold The All-in-One Revit Door Family can be used as Interior as well as Exterior Door and so can the Threshold. The Threshold is adjustable in its profile and can be switched to either interior, exterior or even both. |
Content ID:
RFA2115
Revit Version:
2009 and later
Family Typ:
3D Generic - Metric & Imperial
Content Title:
All-in-One Door
Manufacturer:
-
File Size:
1320 kB
$ 79.99
If you have problems with your purchase or you have any questions before you want to purchase this Revit® Family contact us via our Contact Page (use the Sale Enquiry Section) or just send us an email to sale@revit-content.com and our Sales Team will be happy to help you.
Become a Fan on Facebook
Follow us on Twitter
Follow us on Blogger