All-in-One Escalator-Travelator (Conveyer)
>
>
Escalator - Travelator

The best way to create and organize your Revit Escalator-Travelator in your Project


All of the built-in features in the All-in-One Revit Escalator & Travelator Family were designed from the ground up to take advantage of the advanced parametric capabilities of Revit. So you can create any kind of Escalator & Travelator with just one single Family that you can’t do with any other Escalator & Travelator Family.
All-in-One Revit Escalator-Travelator Family

The Escalator & Travelator System
There are many different Escalator and Travelator (Conveyer) Systems available by various Companies. This All-in-One Escalator & Travelator (Conveyer) Family is the only Revit Escalator & Travelator (Conveyer) Family available that combines all available Escalator & Travelator (Conveyer) Systems in just one advanced parametric Revit Family. The geometry of this Escalator & Travelator (Conveyer) Family is optimized and it takes advantage of the advanced parametric capabilities of Revit without using duplicated elements. This All-in-One Revit Escalator & Travelator (Conveyer) Family was designed from the ground up to be adjusted to a Escalator or Travelator (Conveyer) System automatically just depending on the Angle.
All-in-One Revit Elevator Family - The Elevator System
All-in-One Revit Elevator Family - The Shaft - Pit / Overhead The Truss
With its fully parametric Run and Landings, it lets you setup any Escalator and Travelator (Conveyer) with just a couple of Parameters. The Run can be adjusted from 0 to 45 degrees and the Landings can be setup separate from each other. The Truss supports all major Escalator & Travelator Manufacturer Models and let you setup even the size of the support consoles.
The Steps
The fully parametric Steps make this Escalator & Travelator Revit Family extraordinary. You can set an Angle where the Steps switch automatically to a Conveyer Belt which transforms this amazing optimized Revit Family seamless from an Escalator (for example with 30 degrees or 35 degrees) to a Travelator (Conveyer).

And that is not all the magic functionality of the parametric Steps. Either Steps or Conveyer Belt, they adjust automatically in Size and number to perfectly fit between the bottom and top landings without any adjustments necessary.
All-in-One Revit Door Family - The Panel System
All-in-One Revit Door Family - The Frame System The Balustrade
The fully parametric Balustrade gives you 3 free adjustable Elements to setup exactly the Escalator or Travelator (Conveyer) you need. With two different Bottom based and one Rail based Balustrade Elements you can setup solid Balustrades as well as Glass Balustrades, which are chamfered, expanding the width between clear Step Width and clear Balustrade Width, etc.

The advanced parametric functionality allows you to adjust the Height of Balustrade independently for the Landings as well the Run and you can even adjust the exact start position for each side separate.
All-in-One Revit Elevator Family - Accessories
The Rail
The Rail can be adjusted in its Width and Height as well the Radius and Material. This will allow you to adjust it exactly to your requirements.
All-in-One Revit Elevator Family - Accessories
All-in-One Revit Door Family - The Frame System Preset Escalator & Travelator Types
This All-in-One Escalator & Travelator (Conveyer) Family lets you setup any Escalator & Travelator (Conveyer) System for your Revit Project, and even more convenient, it comes already with a preset Type Catalog so that you just need to select your Manufacturer as well as Escalator & Travelator (Conveyer) Model you need and everything is preset for you out of the box.

The Imperial Version of the Type Catalog comes with preset Escalator & Travelator (Conveyer) models for the US and the Metric Version with preset Escalator & Travelator (Conveyer) models for Europe.

Click on one of the following Links to learn more about the available preset Escalator & Travelator (Conveyer) Models for the All-in-One Revit Escalator & Travelator (Conveyer) Family:
Metric Version of the Type Catalog
Imperial Version of the Type Catalog
Content ID:
RFA0220
Revit Version:
2009 and later
Family Typ:
3D Generic - Metric & Imperial
Content Title:
All-in-One Escalator & Travelator (Conveyer)
Manufacturer:
Otis, Schindler
File Size:
850 kB
$ 79.99

If you have problems with your purchase or you have any questions before you want to purchase this Revit® Family, contact us via email at support@revit-content.com and our Support Team will be happy to help you.