All-in-One Window

The best way to create and organize your Revit Windows in your Project


All of the built-in features in the All-in-One Revit Window Family were designed from the ground up to take advantage of the advanced parametric capabilities of Revit. So you can create any kind of Window with just one single Family that you can’t do with any other Revit Window Family.
All-in-One Revit Window Family

All-in-One Revit Window Family - The Window System The Window System
The All-in-One Revit Window Family is a new and unique way to create Revit Window Families. The built in fully parametric Frame system lets you create any Window System you need for your Project. Due to the proportional Frame System, the Window can be used in various situations just by changing the Width and Height and the Frame System will adjust automatically. This is the first time you get all Windows with just a few clicks in your Revit Project that you need. To maintain your Revit Windows and keep them consistent in design has never been easier then with this All-in-One Revit Window Family.
The Wall Opening
The Wall opening doesn’t get that much attention with normal Revit Window Families as you might have experienced. Not so with this All-in-One Revit Window Family as it lets you have full control over the Wall Opening with many adjustable parameters to get the Opening, the Render wrapping, Reveal, etc. exactly how you require it for your specific Project.
All-in-One Revit Window Family - The Wall Opening
All-in-One Revit Window Family - The Frame System The Window Frame
The fully parametric Window Frame System lets you define up to 10 Areas within your Window which can be flexible adjusted to either a fix glazing or a Window Swing. Additionally each window can have a setup of horizontal and vertical parametric Glazing Bars.
Bay Window
The All-in-One Revit Window Family now comes with a flexible and simple to use Feature to adjust mitered connections between Windows to arrange Bay Windows.
All-in-One Revit Window Family - Window Accessories
All-in-One Revit Window Family - The Panel System The Window Swing
The Window Swing is also fully parametric and lets you setup various window types i.e. Awning Window, Casement Window, etc. Swings open either towards the exterior or the interior dependent on the country you are designing projects for, and therefore this All-in-One Revit Window Family makes it easy for you to switch each Window Swing between interior and exterior. The opening Direction is another great feature of the Window Swing which allows you to setup the hinge side for each Swing separate, and of course any combination of Hinge Positions (i.e. Awning Window, Casement Window, etc.). To show the Opening of the Window Swing, this All-in-One Revit Window Family comes with various Symbol Line Options that allow you to show Symbol Lines localized to your Standards in 2D Plan view and/or Elevation as well as in 3D Views.
Window Accessories
The All-in-One Revit Window Family comes with a parametric Handle for each Window Swing as well as a fully parametric Sill for exterior and interior.
All-in-One Revit Window Family - Window Accessories
The Window System
Window setup
The biggest problem around Windows in a Revit Project is the almost infinite number of possible Window variations, as you might have already experienced with ordinary Revit Window Families. The goal in developing this All-in-One Revit Window Family was to give you one advanced parametric Revit Window Family that allows you to adjust to almost any possible Window Configuration. This amazing flexibility is possible due to 10 independently and easy window setups which allow you to setup main frame and sub frames containing either fix glazing or Window Swings.
All-in-One Revit Window Family - Powerful Window Setup
The Wall Opening
Rough Opening
The correct Rough Opening is the basic functionality that you await from a good Revit Window Family. If the Rough Opening is 100% correct, you can trust to use it for your construction as well as detail documentation drawings. The All-in-One Revit Window Family gives you the possibility to setup specific Rough Distances between your Frame and the actual opening.



Render Offset
You can setup various Wrapping options within the System Wall Family, but this is just the half way to get the exact detail you really need. It is important to be able to control how much the render overlaps your frame separate for interior as well as exterior and the All-in-One Revit Window Family lets you do this in a very convenient way.



Tapered Reveal
Many Projects are refurbishing existing buildings and therefore Windows have to be placed into existing walls that often have tapered reveals. The All-in-One Revit Window Family helps you with its fully adjustable Reveals to exactly show each reveal as it is existing in the specific structure.
All-in-One Revit Window Family - Render Offset

All-in-One Revit Window Family - Tapered Reveal
Cut joined Wall
The Wall System family gives you great possibilities to setup the exact Wall Layers you need. But sometimes it is necessary to add an additional Wall (e.g. Dry-Lining) and join it with the original Wall. The All-in-One Revit Window Family supports those additionally joined walls with its Wall opening and it applies all your settings for Rough Distance, Tapered Reveals as well as Render Offset seamless to the original Wall as well as any additional joined Wall.
All-in-One Revit Window Family - Cut joined Wall
Cavity Closer
The All-in-One Window Family offers a fully parametric cavity closers which can be adjusted in its dimensions as well as position. The cavity closers show accordingly to your detail mode with more or less details. Your benefit is that you have the cavity closers automatically in all your details which saves you the manual masking and detailing.
All-in-One Revit Window Family - Cavity Closer
Opening / Frame Dimensions
The subject of localisation has a very high priority for us as our All-in-One Families are in use in more than 100 countries. The All-in-One Window offers therefor a simple switch to apply the dimensions height / width either as window frame dimensions or as wall opening dimensions.
All-in-One Revit Window Family - Opening / Frame Dimensions
Window Trim
The All-in-One Family offers a fully parametric trim which is now also adjustable to run either fully around the window or just on the sides and the top. All it takes is one single parameter to change.
All-in-One Revit Window Family - Window Trim
The Frame System
All-in-One Revit Window Family - Fix / Swing Fix / Swing
Standard Revit Window Families give you a fix setup of Fix and Swing Elements. Not so with this All-in-One Revit Window Family as it allows you to setup your Revit Window exactly as you need it. You decide the frame setup as well as which Area contains a fix glazing and which one Swing Elements.
All-in-One Revit Window Family - Louvres Louvres NEW (Ver. 1.3)
Since Version 1.3 you are not just limited to Fix and Swing Elements. Each pane can now additionally be adjusted to a Louvre Element which can open and close the louvres each angle you wish. This is not just great for your technical drawings, this feature will make your renderings and presentations even better.
All-in-One Revit Window Family - Glazing Bars Glazing Bars
This All-in-One Revit Window Family lets you setup as many horizontal and vertical parametric Glazing Bars as you require. This feature is available for each Window Setup independently if you adjust to a Fix Glazing or Swing Elements, the Glazing Bars adjust automatically to the correct position.
All-in-One Revit Window Family - Interior and Exterior Window Swing Interior / Exterior
This All-in-One Revit Window Family gives you also the benefit of localization for the Position of the Swing Elements towards exterior or interior. The Window Setup allows you even to mix the position of Window Swings within one Window.
All-in-One Revit Window Family - Interior and Exterior Window Swing Cut Plane
Plan View Graphics

This All-in-One Revit Window Family includes also parameters to setup which of the panes shall be shown in plan view, which is a great feature for windows with various sizes, as the result of the Revit Cut Plane is not always showing what you actually want to show.
Symbol Line
The All-in-One Revit Window Family shows your setup of Swing Elements and there Hinge Positions with 2D and 3D Symbol Lines in Elevation and Plan view. As our All-in-One Families are in use in more then 100 countries worldwide the Symbol lines can also be adjusted to your local standards.
All-in-One Revit Window Family - Symbol Lines Options All-in-One Revit Window Family - Symbol Lines 3D
Bay Windows
Feel free to setup your Bay Window
The All-in-One Revit Window Family now gives you the full freedom to combine the All-in-One Window to any Bay Window Arrangement with its fully parametric and fully integrated mitered corner Post System.
All-in-One Revit Window Family - Symbol Lines Options All-in-One Revit Window Family - Symbol Lines Options All-in-One Revit Window Family - Symbol Lines Options
Parametric Post
The fully parametric Post allows you to setup the connection Post you need to make any arrangement of Bay Windows. You can control the Angle the Window miters, the Width, Depth as well as Material of the Post.
All-in-One Revit Window Family - Parametric Post
Window Accessories
Handle
The Window Swing Handle in this All-in-One Revit Window Family is fully parametric and adjust automatically to your selected Hinge Position.
All-in-One Revit Window Family - Parametric Handles
Sill
To finally complete the realistic Design of this All-in-One Revit Window Family, you can setup an internal and external Sill to your project requirements. The exterior Sill is available as Stone Sill, Brick Sill as well as Metal Sill.
All-in-One Revit Window Family - Parametric Interior and Exterior Sill
Content ID:
RFA2316
Revit Version:
2009 and later
Family Typ:
3D Generic - Metric & Imperial
Content Title:
All-in-One Window
Manufacturer:
-
File Size:
1300 kB (up to 5 Window Areas)
1600 kB (up to 10 Window Areas)
$ 79.99

This All-in-One Revit Window Family includes the metric and the imperial Version
If you have problems with your purchase or you have any questions before you want to purchase this Revit® Family contact us via our Contact Page (use the Sale Enquiry Section) or just send us an email to sale@revit-content.com and our Sales Team will be happy to help you.